Later, I used the circle pattern tools to repeat the hole around the circle. So I decided to make a pretty big and round pieces. I decided to start by making a piece that would be my base for connecting the other pieces. I thought I would make my own pieces to assemble as desired. The idea of doing a project like that came to mind when I saw someone playing with legos. I decided to do my design in the Fusion 360 software. I decided to make the rule of 25 mm up to 35 mm because the material should have a thickness of 30 mm.Īs you can see, the true thickness of the material to be press fit is 2.8 mm.įor my pressfit project, I decided to make five pieces of simple shape with holes to insert them into each other. Also, both projects are a parametric design so that it is easier to make adjustments. It is important to be very precise so that our press fit project is well done. The first project is a rule to determine the thickness of our material. So I made a small sign to try engraving and cutting at the same time. I decided to test the parameters of this test. So we decided to make a small test board with different parameters. The person who documents the group assignment this week is Annie Ferlatte but this week I also did my own little test.įor the group project, we had to characterize our laser cutter. Now it's time to check the setting for the laser cutter in the program JobControl. The next step is to move the board very slowly up until the ruler falls. The next step is to put the rule that comes with laser cutting to be able to adjust the height of the laser to have the best focus. You move the head of the laser with the arrows on the control panel and you position it over the material to be cut. The first step is to power on the laser machine and the air filter. You can find the manual right hereĪfter the installation, you need to set your preferences. Normally it installs with a CD that came with Trotec. You have to install the software that comes with laser cutting. Now is the time to stick all part together. So in InkScape, I separated each color into a different image and then was able to cut it with the machine. With this type of vinyl cutting, one must cut one color at a time and then assemble them at the end. I chose to make my logo that I made last week on vinyl cutting. When the origin is chosen, press the button origin for a few seconds to fix the origin. Position the head where you want your drawings to start with the arrows on the control panel. In this case we select Roll and press enter. The next step is to choose the type of paper. It's really important that the little wheels that holds the vinyl are into the white space. Here are the parameters for the material that I want to cut.Īfter you power on the vinyl cutter, you need to insert your vinyl into the machine. When you want to send your image from InkScape to CutStudio, You need to go on extensions tab and select Roland CutStudio. You can find your extension folder like this. inx file directly in your extension folder. You can find the plug-in right here and you need to put the. You also just click on this link to start your first download.Ĥ-Install the Inkscape plug-in for CutStudio I found the list directly in the manual in section "Simple! Basic Cutting". To be able to use the Roland vinyl cutter, you need to install some softwares.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |